Installation Instructions - Festo CPX-CMAX-C1-1 Instrucciones Para El Usuario

3

Installation instructions

3.1 Note on replacing the CMAX module
All project−related parameters are stored in the CMAX
module. Perform commissioning again with the Festo
Configuration Tool; see system manual for the CMAX.
You can find the current version in the Internet under:
è www.festo.com ˛ Downloads ˛ Download Area:
Software, drivers and firmware ˛ Enter search term:
CMAX
3.2 Mounting
The CMAX is mounted in an interlinking block of the CPX
terminal.
1
Screws,
Tightening torque
0.9 1.1 Nm
2
CMAX
3
Interlinking block
with contact rails
Festo CPX−CMAX−C1−1 0902NH English
1
2
3
11