Replace An Active Device; Add An Active Device; Remove An Active Device; Change Pin - Telefunken TX 100 Bluetooth Serie Instrucciones De Uso

Replace an active device

You can replace an active device with a device on the paired devices list even if you already have
two devices on the active devices list.
1. In standby mode, Press MENU/OK and choose Bluetooth.
2. Select Paired devices.
3. Select a device.
4. Select Connect.
5. Confirm by MENU/OK. The handset display Maximum of 2 devices can be connected
and then Replace an existing active device with mobile? Press Menu/OK.
6. Select the device to be replaced, then press MENU/OK.
7.
Connecting Mobile Phone A to the base...
8. Depending on your MOBILE phone settings, you may need to press a key on your
MOBILE phone to confirm the connection. When you successfully replace and connect an
active device with a paired device, the handset displays Device connected.

Add an active device

You can have a maximum of two devices on the active devices list.
1. In standby mode, Press MENU/OK then choose Bluetooth.
2. Select Active devices.
3. Select Empty position
4. Select Add.
5. Select a device from the paired devices list.
6. Press MENU/OK.
7. The handset displays Device added to active list and then Connecting Mobile Phone B
to the base... If there are no paired devices to add, the handset displays All paired
devices are devices already connected.
8. Depending on your mobile phone settings, you may need to press a key on your mobile
phone to confirm the connection. When you successfully add and connect an active device, the
handset displays Device connected.

Remove an active device

You can remove an active device from the active devices list.
1. In standby mode, press MENU/OK and choose Bluetooth.
2. Select Active devices,
3. Select the desired device.
4. Select Remove active.
5. Press MENU/OK.
6. The handset displays Device removed from active list.
Note: Even though the active device is removed from the active devices list, it is still on the paired
devices list
G. Change PIN
You are required to enter a PIN when establishing a Bluetooth connection.
The default Pin of your telephone base is 0000.
1. In standby mode, press MENU/OK and choose Bluetooth.
2. select Change PIN,
TX Bluetooth
The handset displays Device removed from active devices list and then
57