Et Date And Time; Date Format; Ime Format; Et Date And Time Manually - Telefunken TX 100 Bluetooth Serie Instrucciones De Uso

Set date and time
If you have subscribed to Caller ID service, the date and time is set automatically for all handsets
when you receive your first call. The date and time is recorded with each answering machine
message you receive. If you have not subscribed to Caller ID service, you can set the date and
time manually.

Date format

1. In standby mode, press MENU/OK then select Settings.
2. Select Date format.
3. Select date format DD/MM/YY or MM/DD/YY.
4. Press MENU/OK to save your choice.
Time format
1. In standby mode, press MENU/OK then select Settings.
2. Select Time format.
3. Select date format 12 - Hour or 24 - Hour.
4. Press MENU/OK to save.
Set date and time manually
1. In standby mode, press MENU/OK then select Settings.
2. Select Set date/time.
3. Use the keypad to enter the date according to DD-MM-YY or MM-DD-YY format.
4. Press MENU/OK then use the keypad to enter the time according to 12-Hour or 24-Hour
format.
5. Press MENU/OK to save the settings.
Auto answer
1. In standby mode, press MENU/OK then select Settings.
2. Select Auto answer.
3. Select On or Off.
4. Press MENU/OK to confirm.
Note: As long as you have auto answer set to ON you can answer a call by lifting the handset C
the base.
If you have switched auto answer OFF, you will need to press HOME when you lift up the handset.
The default setting of Auto Answer is ON.

Handset reset

1. In standby mode, press MENU/OK then select Settings.
2. Select Reset.
3. Use the keypad to enter 4-digit PIN (default 4-digit PIN is 0000).
4. Confirm by MENU/OK. The display shows Reset to default settings?
5. Press again MENU/OK to confirm.
TX Bluetooth 69