Technical Characteristics - Nice POA1 Instrucciones Y Advertencias Para El Instalador

Deleting all transmitters
All the memorised codes can be deleted as follows:
Table "B4" Deleting all transmitters
1. Press the receiver button and hold it down
2. Wait for the Led to light up, then wait for it to switch off
and then wait for it to flash 3 times
3. Release the button exactly during the third flash
N.B.: if the procedure was performed correctly, the Led will flash 5 times after a few moments.

Technical characteristics

Receivers
Decoding
Transmitter compatibility
Frequency
Input impedance
Outputs
Sensitivity
Working temp.
Transmitters
Buttons
Power input 12Vdc Batt. 23A
Absorption
Frequency
Working temp.
Radiated power
SMXI
Rolling code
52 bit FLOR
FLOR, VERY VR
FLOR VERY VR
1 – 2 - 4 2
6Vdc lithium batt.
10mA 10mA
SMXIS
Rolling code
64 bit SMILO
SMILO
433.92MHz
52ohm
4 (on connector SMXI)
better than 0.5µV
-10°C ÷ + 55°CC
FLO VERY VE
1 – 2 - 4 2
12Vdc Batt. 23° 6Vdc lithium batt.
15mA 10mA
433.92MHz
-40°C ÷ + 85°C
100µW
Example
RX
x3
3°
RX
x5
SMXIF
1024 FLO combinations
FLO, VERY VE
SMILO
2 - 4
12Vdc Batt. 23A
25mA
19
GB