ARIETE Grati Professional Top 446/1 Manual De Instrucciones página 9

GB
Do not use:
- soft cheese, as it will stick to the roller!
- very mature cheese, harder crusts, or stale bread to avoid damaging the gears or squash-
ing the cutting tooth on the roller.
Removing/refitting the hopper
Unplug the appliance, lift lever (9) and remove the hopper by pulling it upwards.
To refit the hopper simply reinsert it, taking care to turn the tooth (Y) towards the pusher
hinge (Fig. C).
Push the hopper down as far as it will go, or the appliance will not start (Fig. D).
Removing/refitting the roller
Unplug the appliance, rotate cover (1) clockwise by approximately 1/4 of a turn and pull it
outwards, and then extract roller (2) (Fig. E).
To refit the roller, simply insert it into its seat, fit cover (1) and, while pressing it, rotate it
anticlockwise by 1/4 of a turn (Fig. F).
Removing/refitting the roller and ice crushing accessory
Ensure the appliance is not attached to the electric mains. Remove the hopper (5), Fig. G.
Remove the roller cover (1), Fig. H. Remove the roller (2), (Fig. I) and insert the ice crushing
roller (12), Fig. L. Insert the ice crushing accessory (13) by pushing it home (Fig. N). Refit
the roller cover (Fig. O).
Using the ice crushing accessory.
Fill up the ice crushing extension with NO MORE THAN 250 gr. of ice cubes (Fig. Q), and
plug the appliance into the mains. Before use, carefully check that the cheese container
(11) and the roller cover (1) are fitted correctly or the appliance will not start.
Shut the cover by holding the ice crushing accessory with one hand and pressing the starter
button with the other (Fig. R).
Note: for safety reasons, in the event that the cover pops open, the appliance will stop
immediately. Shut the cover to restart the operation.
In order prevent injuries or damages to the appliance always keep your hands and
kitchen utensils away from moving parts. The particular design of the ice crushing blade
does not require the use of tools or presses for ice feeding. It is possible to grate chocolate
for as long as it has previously been cut into two or three centimetre thick slices and kept
inside the fridge for at least one hour.
At the end of the operation, unplug from the mains and accessory or blade assembly for
dishwasher cleaning. Remove the tray with its content and store away the appliance.
Handle roller with care. Danger of cuts.
Removing/refitting the pusher
Unplug the appliance, remove the rubber pusher by pulling it vigorously outwards.
To refit pusher (8), simply insert it into its seat and press it vigorously, making sure the
pusher tab is aligned with the slot in the lever (Fig. S).
Removing/refitting the container
Grated food is delivered to the container (11), which may be removed by extracting it from