HAIRCUT TH31 Guía De Usuario página 25

4.4 Using the comb attachments
Figure 5: Fitting or removing the
comb attachment.
4.5 Lubricating the cutters
Figure 6: Removing the blades by
pressing on it.
Figure 7: Applying lubricating oil.
Selecting the comb attachment: 3-
6 mm or 9-12 mm.
Positioning the comb attachment:
grasp the comb attachment (A) by its
sides and clip it into the slots (B).
When the comb
correctly fixed, it is immobilized.
Then adjust the cutting height (Figure
1, C).
Removing the comb attachment:
grasp it by the sides and pull it
backwards.
After 30 minutes of use, the cutter
lubrication warning icon (Figure 1, M)
flashes.
Switch the clippers off by pressing the
button (Figure 1, E).
Set the adjustment knob to the 1.9
mm position (Figure 4).
Detach the blades by pressing on the
spot shown by the arrow with your
thumb.
Apply 1 or 2 drops of lubricating oil on
the 5 points shown opposite.
Reinsert the blades, taking care to fit
the lug in its slot first.
25
attachment is