HAIRCUT TH31 Guía De Usuario página 26

4.6 Using the turbo function
Activating the Turbo function: press the Turbo button (Figure 1, D) to increase
the cutting speed and power by about 20%.
Disabling the Turbo function: press the Turbo button (Figure 1, D) again.
4.7 Switching off
Switch the clippers off by pressing the button (Figure 1, E). The "On" icon (Figure 1,
J) goes out.
5 Servicing
Use the soft brush supplied to remove hair from the blades. Never rinse the clippers
with water. If necessary, use a cloth slightly dampened with water or mild liquid
soap. Never use abrasive products or solvents.
Figure 8: Cleaning the cutters
4. Use the cleaning brush (D) to remove hair from the gaps between the fixed
cutters (C) and the mobile cutters (A). Never remove the cutters or their
springs from the holder.
5. Apply 1 or 2 drops of lubricating oil on each of the 5 cutter lubrication points
(Figure 7).
6. Put the blades back on the clippers.
1. Detach the blades by pressing
on the spot shown by the arrow
(Figure 6) with your thumb.
2. Use the cleaning brush supplied
to clean the blades.
3. Push the plastic holder (B) back
with your thumb to separate
the fixed cutters (C) and the
mobile cutters (A) by about
2 mm.
26