Celestron 44422 Guía De Instalación Rápida página 3

USING YOU HD DIGITAL MICROSCOPE IMAGER
1. Remove the HD Imager and the collar from the box.
2. Attach the adjustment collar to the HD
Imager using the set screws to secure.
3. Remove the eyepiece from your
microscope and replace it with the
assemble imager and collar.
4. Install the software from the product page at celestron.com, on
to your Windows or Mac PC.
NOTE
Mac operating systems are supported, but can only achieve a maximum
:
of 2MP resolution when taking still images.
5. Once the software is installed, connect your imager by plugging
the attached USB cable into an open USB port on your computer.
6. Once the driver is recognized by your system, the streaming
image should appear in your software window.
7. Focus the microscope as you
would normally.
ENGLISH | 3