Treble Control - Audiovox Rampage ACD-25 El Manual Del Propietario

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
1
ON/OFF POWER BUTTON
Press this button to turn the unit on or off.
2
VOLUME / LEVEL CONTROL
To increase the volume level, press the "VOL
button. The volume will increase and the level will
be shown on the display panel from a minimum of
"VOL 00" to a maximum of "VOL 51". To increase
the volume quickly, keep the button pressed. To de-
crease the volume level, press the "VOL
Keep the button pressed to decrease the volume
quickly. The display will automatically return to the
normal indication 5 seconds after the last volume ad-
justment or when another function is activated. These
buttons are also used in conjunction with the Select
3
button to adjust the bass, treble, balance, and
fader levels as described in
3
SELECT BUTTON (SEL)
CONFIRMATION TONE SELECTOR (
This button is used to select the audio function (vol-
ume, treble, bass, balance, or fade) to be adjusted
using the Level Control
button once will set the unit for treble adjustment
("TRE" will appear on the display panel). Pressing
the button additional times will select bass ("BAS"
5 5 5 5 5
on the display), balance ("BAL"), fader ("FAD") or
volume ("VOL"). The display will automatically re-
" button.
4 5 6 7
, , and
( ) )
( )
( )
2
. Pressing the Select
turn to the normal indication 5 seconds after the last
adjustment or when another function is activated.
Pressing and holding the button for longer than 2
"
seconds will activate the Confirming Tone feature as
indicated by two beep tones and the
appearing on the display panel. When activated, the
unit will produce a single beep tone whenever a mo-
mentary press function is activated and two beep
tones whenever a press and hold function is acti-
vated (ie. Auto-Store Tuning, etc.). To deactivate this
feature, press the button again for longer than 2 sec-
( )
onds ( the indication will disappear from the
( )
( )
display panel).
4

TREBLE CONTROL

.
To adjust the treble level, first select the Treble mode
by pressing the Select button
indication appears on the display panel. Within 5
seconds of choosing the Treble mode, press the
or button of the Level Control
treble response as desired. The treble level will be
shown on the display panel from a minimum of
-7 to a maximum of +7 (0 is flat response). The display
will automatically return to the normal indication 5 sec-
onds after the last adjustment or when another function
is activated.
( )
indication
( )
( )
3
so that the "TRE"
2
to adjust the