Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Tuning function. The radio will seek the next avail-
able station and stop at that frequency. The Seek
function can be stopped by pressing the button again
or activating any other tuning function.
Pressing and holding either button for longer than
0.5 seconds will cause the radio to continue tuning
rapidly in the selected direction until the button is
released at which point it will seek to the next avail-
able station.
bo
AUTO-STORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily
to scan the 6 stations pre-set into the memories of
that band. The unit will stop at each pre-set station
for 5 seconds before continuing to the next pre-set
station. Press the button again momentarily to stop
Pre-Set Scan operation and remain on the selected
frequency.
Pressing the button for longer than 2 seconds will
activate the Auto-Store Tuning feature which will au-
tomatically scan the band and enter up to 6 strong
stations into the 6 pre-set memories (the indication
"AST" will appear on the display panel to show that
Auto-Store Tuning is in progress). After entering the
stations into the memories, the unit will automati-
cally stop at each station for 5 seconds so each can
be heard. If you have already set the pre-set memo-
ries to your favorite stations, activating the Auto-Store
feature will erase those stations and enter the new
strong stations. This feature is most useful when
travelling in a new area where you are not familiar
with the local stations.
bp
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each band,
use the following procedure:
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the
Manual Up/Down or Automatic Seek Tuning Con-
bn
trols
.
3. Press the pre-set button to be set and continue to
hold it in. After approximately 2 seconds, the vol-
ume will be momentarily muted, indicating that
the station is now set into that pre-set memory
position. The station can now be recalled at any
time by pressing that button.
4. Repeat the above procedure for the remaining 5
7 7 7 7 7
pre-sets on that band and for the other 4 bands
on the unit.
bq
LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the
frequency, time, and activated functions.
NOTE: It is a characteristic of LCD panels that,
if subjected to cold temperatures for an extended
period of time, they may take longer to illumi-
nate than under normal conditions. In addition,
the visibility of the numbers on the LCD may
slightly decrease. The LCD read-out will return
to normal when the temperature increases to a
normal range.
br
DISC SLOT
With the label surface facing up, gently insert the
disc into the slot until the soft-loading mechanism
engages and disc play begins. The
track number and elapsed time will appear on the
display panel.
NOTE: This unit is designed for play of stan-
dard 5" (12cm) Compact Discs ONLY. Do not
attempt to use 3" (8cm) CD-Singles in this unit,
either with or without an adaptor, as damage to
the player and/or disc can occur. Such damage
will not be covered by the Warranty on this prod-
uct.
bs
TRACK SELECT
These buttons are used to quickly select the begin-
ning of a particular track. With each momentary tap
of the Forward Track Select button (TRK +), the next
higher track number will be selected as shown on
the display panel. Similarly, with each momentary
tap of the Backward Track Select button (TRK -), the
next lower track number will be selected.
bt
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc
can be made by the Cue and Review functions. Press
and hold the Cue button ( + ) to advance rapidly in
the forward direction or the Review button ( - ) to
advance rapidly in the backward direction. During
either function, the elapsed time within each track
will automatically be shown on the display panel.
bu
CD PLAY/PAUSE SELECTOR (
CD MODE SELECTOR
During disc play, press this button to temporarily stop
play of the disc (the
"PAUS" will appear on the display panel). Press the
button again to resume play of the disc from the point
at which it was stopped. Pause mode will also be
cancelled by activating any other disc function.
When listening to radio with a disc loaded in the unit
indication,
/ )
indication will flash and
Publicidad
Tabla de contenido
