Steren BAF-510 Manual De Instrucciones página 7

5.- REVERB
This control allows you to set the reverb effect level sent to the
speakers.
6.- TREBLE CONTROL
Turn to the right to boost high frequencies, adding crispness too
percussion from drum machines, cymbals and synths. Turn to
the left to cut these frequencies, reducing sibilance or hiss. The
control has a shelving response giving +/-10dB of boost or cut at
10kHz.
7.- BASS CONTROL
The bass control shelving response gives 10dB of boost or cut
at 100Hz. Add warmth to vocals or extra punch to guitars, drums
and synths by turning to the right. Turn to the left to reduce stage
rumble, hum or to improve a mushy sound.
8.- GAIN
Allows you to set the volume level per channel
9.- DSP EFFECTS DISPLAY
Displays the selected effect out of 16 possible effect presets.
10.- DSP EFFECTS SELECTOR
The UP/DOWN buttons allow fast and easy scrolling in either
direction through the 16 effect presets.
Effects List:
Half 1, Half 2, Room 1, Room 2, Room 3, Plate 1, Plate 2, Plate
3, Chorus, Flange, Delay 1, Delay 2, Chorus/Room, Chorus/
Room 2, Vocal cancel, Rotary speaker.
11.- POWER ON INDICATOR
This LED lights blue when the unit is ON.
12.- 5-BAND GRAPHIC EQ
The 5-band channel graphic equalizer allows you to adjust the
frequency response of the L and R Channel bus signal, providing
a maximum of ±12dB of cut and boost for each frequency band
from the fl at position.
ENGLISH-7