Call To Switchboard - urmet domus alpha IPerCom 1168/1 Manual Del Usuario

3.6.2
The following screen appears when the button is pressed at the icon
display or any numeric or alphabetic key on the keypads. Pressing the shortcut
button next to the
3.6.3
Enter the calling code associated with the user you want to call.
The button at the
delete errors. If no characters are present this button will go back to the Home
Page.
Pressing the button
3.6.4
The page shown here by the side will appear if an incorrect code is entered.
3.6.5
Press buttons and
The button corresponding to the
page.
Press the button at the icon

3.7 CALL TO SWITCHBOARD

3.7.1
The Homepage appears on the display when any button on the call module is pressed
or after the user approaches the call station as indicated by the presence sensor
(optional).
3.7.2
After pressing the button at the icon
into contact with the operator.
Conversations and busy conditions are managed in the same way as in calls
by name.
0
icon to go back to the Home Page.
icon or "X" button on the keypad module can be used to
opens the block selection page.
to select the block of the user to be called.
icon allows you to return to the previous
to send the call.
you can call the switchboard and be put
on the
DS1168-033