Opening The Door Using A Transponder Key - urmet domus alpha IPerCom 1168/1 Manual Del Usuario

3.8.4
According to the selected input type, one of the two screens shown by the side
appears on the display:
3.8.5
A page containing an error message will appear on the display for two seconds if
an incorrect code is entered.

3.9 OPENING THE DOOR USING A TRANSPONDER KEY

3.9.1
Pass the transponder key near the reader on the key reader module Ref. 1168/45
near the sensor in the middle of the module.
The screen shown on the side refers to a system where both gates are available.
If there is only one gate in the system, the gate access screen will be shown
directly (see below).
3.9.2
Press the shortcut menu next to the
next to the icon to open the gate.
If the key is valid, the calling module will activate the opening of the door or gate;
one of the two warning messages shown on the side appears on the display.
3.9.3
The message shown here by the side will appear on the display for two seconds
if the key is not valid (not registered).

icon to open the door. Press the button
DS1168-033