Setting Up The Printer - Xerox Phaser 3150 Guia Del Usuario

12
Using a PostScript Driver

Setting Up the Printer

The way to set up your printer is different depending on which
cable you use to connect the printer to your computer- the
network cable or the USB cable.
For Network-connected Macintosh
In Mac OS 8.6 - 9.2
1
Follow the instructions on page 11 to install the PPD file on
your computer.
2
From the Apple menu, select Chooser.
3
Click LaserWriter 8 (the PostScript driver provided with
your Macintosh).
The name of your printer appears in the list.
4
Select XRX000xxxxxxxxx from the printer box (where the
xxxxxxxxx varies depending your printer) and Click Select.
If Auto Setup does not work properly, click Select PPD,
choose Xerox Phaser 3150 and click OK.
5
When the setup is completed, you see your printer icon
created as a desktop printer.
6
Close the Chooser.
7
When a message window appears telling you that you have
changed your current printer, click OK.
In Mac OS 10.1 - 10.3
1
Follow the instructions on page 11 to install the PPD file on
your computer.
2
Open Print Center from the Utilities folder.
3
Click Add in the Printer List.
4
Select the AppleTalk tab.
The name of your printer appears on the list. Select
XRX000xxxxxxxxx from the printer box, where the
xxxxxxxxx varies depending on your printer.