Panasonic KX-DT321 Guía De Referencia Rápida página 55

DT321SP_QRG-UF.book Page 55 Tuesday, September 16, 2008 11:28 AM
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall
as indicated.
2. Hook the unit onto the screw
heads.
Note:
Make sure to set the print size to
correspond with the size of this
page. If the dimensions of the
paper output still deviate slightly
from the measurements indicated
here, use the measurements
indicated here.
One screw here
One screw at either point
55