Tripp-Lite SmartPro AGSM5060 El Manual Del Propietario página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic Operation
Other UPS Features (Rear Panel)
AC Receptacles: your UPS features 15-amp AC outlets, and select models
also feature 20-amp and 30-amp AC outlets. These output receptacles
provide your connected equipment with AC line power during normal
operation and battery power during blackouts and brownouts. The UPS
protects equipment connected to these receptacles against damaging
surges and line noise. If you have a serial or USB connection to your UPS,
15 amp/120V
you can remotely reboot connected equipment by turning the receptacles
NEMA 5-15R
OFF and ON using Tripp Lite's PowerAlert Software. Select models have their
receptacles divided into one or more load banks (labelled "LOAD 1," etc.)
which may be remotely switched OFF and ON using Tripp Lite UPS software
without interrupting power to equipment connected to the other outlets.
Select models feature special outlets (clearly labeled on the rear panel)
which provide surge-only (not battery backup) protection designed for laser
printers and other heavy-draw devices. Select models also feature outlets
20 amp/120V
labelled "UNSWITCHED", which may not be remotely switched off. See
NEMA 5-20R
software instructions for details.
30 amp/120V
NEMA L5-30R
20 amp/120V
NEMA L5-20R
Communications Ports (USB or RS-232): these ports connect your UPS
to any workstation or server. Use with Tripp Lite's PowerAlert Software and
included cables to enable your computer to automatically save open files
and shut down equipment during a blackout. Also use PowerAlert Software
to monitor a wide variety of AC line power and UPS operating conditions.
Consult your PowerAlert Software manual or contact Tripp Lite Customer
Support for more information. See "USB and RS-232 Serial
Communications" in the "Optional Installation" section for installation
instructions.
EPO (Emergency Power Off) Port: your UPS features an EPO port that
may be used to connect the UPS to a contact closure switch to enable
emergency inverter shutdown. See Optional Installation.
17-06-249-932406.indb 11
11
6/20/2017 4:49:16 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido