Craftmade Olivier OV70AG Guia De Instalacion página 9

Ocultar thumbs Ver también para Olivier OV70AG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

9. Light Kit Assembly. (cont).
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws.
Connect WHITE wire from motor housing to
WHITE wire from light kit fitter. Connect BLACK
wire from motor housing to BLACK wire from
light kit fitter. Be sure molex connections snap
together securely.
Align slotted holes in light kit fitter with
loosened screws in motor plate. Twist light kit
fitter to lock. Re-insert screw that was
previously removed and securely tighten all 3
screws with Phillips screwdriver.
Install three 60 watt max. candelabra base
bulbs (included).
Important: When replacing bulbs, please allow
glass shade cage, glass shade, light kit fitter and
bulb(s) to cool down before touching them.
Re-attach the glass shade and glass shade cage
to the light kit fitter using the rubber washer,
hex nut and finial that were prevously removed.
Do NOT overtighten finial as glass may crack or
break.
motor
plate
motor plate
screw
light kit
fitter
light kit
fitter
rubber washer
finial
page 8
molex
connections
glass
shade
glass
shade
cage
hex nut

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido