Getting To Know Your Scroll Saw - KNOVA KN SS-162 Manual Del Usuario

Plug power cord into an 110 120V properly grounded type
outlet. If the outlet you are planning to use for this power tool
is of the 2-prong type. dO nOt ReMOVe OR AlteR tHe
GROUndInG PROnG In Any MAnneR. Use an adapter as
shown below and always connect the grounding lug to known
ground. It is recommended that you have a qualified electri-
cian replace the tWO-prong outlet with a properly grounded
tHRee-prong outlet.
GROUndInG lUG
SCReW
3 PROnG PlUG

GETTING TO KNOW YOUR SCROLL SAW

1.QUICK ReleASe And tenSIOn leVeR: Allows you to
quickly loosen, or tighten the blade to its original tension with
lever action.
2.blAde GUARd: Protects hands from blade contact.
3.blAdeHOldeR: Retain and position blade.
4.SAWdUStblOWeR: Keeps workpiece clean for more ac-
curate scroll cuts. For best results, always direct air flow from
blower tube at blade and workplace.
5.0n / OFF SWItCH: Has holes provided by the switch for
a lock. this feature is intended to prevent unauthorized and
possible hazardous use by children and others. to turn saw on
push switch to the "on" position, to turn saw off push switch
to "off" position.
6.beVelSCAleS: Shows degree blade is tilted for bevel cut-
ting.
7.blAde StORAGe CASe: your scroll saw is equipped with a
blade storage area located on the side of the saw. the blade
storage area conveniently stores the blade adapter, allen
wrenches and both pin and plain end blades.
8. dROP FOOt: Prevents your workpiece from raising up from
the table.
MAKe SURe
COnneCted
tO A KnOWn
GROUnd
2 PROnG
ReCePtACle
AdAPteR
WARnInG: tIHe GReen GROUndInG lUG eXtendInG
FROM tHe AdAPteR MUSt e3e COnneCted tO A PeR-
MAnent GROUnd SUCH AS tO A PROPeFIly GROUnd-
ed OUtlet bOX nOt All OUtlet bOXed ARe PROPeRly
GROUnded.
If you are not sure that your outlet box is properly grounded
have it checked by a qualified electrician.
nOte: the adapter illustrated is for use only if you already
tHIS IS
have s properly grounded 2 prong receptacle. Adapter is not
allowed in Canada by the Canadian electrical Code. the use
of any extension cord will cause some loss of power. Use only
3 wire extension cords, which have 3-prong grounding type
plugs, and 3 pole receptacles, which accept the tools plug.
Extension Cord Length
Up to 1000 Ft.
100 200 Ft.
200 400 Ft.
QUICK ReleASe And tenSIOn leVeR
blAde StORAGe CASe
5
Wire Size A. W. G.
16
14
10
SAWdUSt
blOWeR
beVelSCAleS
blAde GUARd
blAdeHOldeR
dROP FOOt
0n / OFF
SWItCH