KERN EG-A06 Manual De Usuario página 7

• Remove the 2 fastening screws of the display circuit board
• Subsequently set up the plug-in connection to the display circuit board (3) of
the balance (CN5).
• Now fasten also the display circuit board using the screws loosened
previously.
• Place the upper housing section and attach it to the lower housing section by
screws. Screw down both fastening screws (3) re-secure the bracket (2).
Attach the weighing plate (1).
Information:
Though the rechargeable battery is immediately operative, it should be charged for at
least 8 hours using the mains adaptor before being used for the first time.
EG-A06-IA-defsi-0610
CN5
7