Check Before Treatment - B.A. International BA Optima BA175E Operación Manual

6. Check before treatment

Check for handpiece vibration, noise and overheating. If any
abnormalities are found do not use the handpiece and contact your
Authorized B.A. International Dealer.
7. Maintenance
After each patient maintain the product as follows.
7-1 Cleaning (Handpiece)
1) Remove dirt and debris from the product. Do not use a wire brush.
2) Wipe clean with alcohol-immersed cotton swab or cloth.
This icon denotes that the product can be washed via Thermo
Disinfector.
Refer to the Thermo-Disinfector manual.
4
CAUTION
• A fter washing with Thermo-Disinfector and prior to lubrication,
dry the product until all internal moisture is thoroughly removed.
Thermo-Disinfector moisture remaining inside the product could
reduce the effect of lubrication and could cause corrosion inside
of the product.
• T o clean the product never use any solvent such as benzine or
thinner.
7-2 Lubrication
BA ULTIMATE SPRAY
Apply BA ULTIMATE SPRAY every time after each use and/or before
autoclaving.
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle into the Spray Port nozzle on the can.
3) Insert the Spray Nozzle in rear of the handpiece. Hold the
handpiece and spray for approximately 2-3 seconds. Apply
lubricant until it expels from the handpiece head for at least 2
seconds. (Fig.3)