Descargar Imprimir esta página

Joie every stage fx Manual De Instrucciones página 14

Ocultar thumbs Ver también para every stage fx:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1. Press the red button to disengage
the buckle.
41
2. Remove the infant insert and
crotch pad.
!
When installing the child restraint in
the Junior mode, do not use the
infant insert.
42
3
1
-1
3. Detach the snaps.
42
4. Lift the upper flap upward and pull the lower flap forward, and then store the
shoulder harnesses and buckle in their storage compartments.
5. Pull the buckle to the back of the seat pad, and then store the buckle and
buckle tongues in respective storage compartments.
6. Do reattach the snaps to recover
the seat pad. The reassembled seat
pad is shown as
43
25
41
4
2
-2 &
-3
42
42
-4
42
43
ii. Securing your Child in the Child Restraint
a. For installation with 3-point-belt
1. Place the child in the child restraint
and check whether the shoulder belt
guides are at proper height.
2. Position shoulder belt through
shoulder belt guide, pass waist
belt through lap belt guidings. Fasten
buckle and pull the vehicle belt
to tighten.
44
!
Shoulder belt must pass through
-1
shoulder belt guide.
45
!
Waist belt must pass through
lap belt guidings.
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
-1
44
!
Never use a vehicle waist-only belt
across front of child.
!
Do not use shoulder belt loose or
positioned under arm.
!
Do not use shoulder belt behind
child's back.
!
Do not allow child to slide down in
the child restraint in case of
strangulation.
44
1
45
1
2
26

Publicidad

loading