Joie every stage fx Manual De Instrucciones página 8

2. Fasten the shoulder belt in the two shoulder-belt slots at the back of the
child restraint.
13
!
Shoulder belt must pass through the Lock-off
!
Ensure the belt lock off cover is completely closed when not in use to
prevent injury, or damage to vehicle upholstery.
13
3. While pressing the child restraint,
pull the belts to fasten the child
restraint tightly and securely.
15
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
!
Please check by moving the child
restraint back and forth.
13
.
14
14
15
Correctly assembled vehicle belt is shown as
!
Waist belt passes through the lap belt guidings , as
!
Shoulder belt must passes through the shoulder-belt slots, as
!
The vehicle buckle tongue is engaged with the buckle correctly,
-3
as
16
16
ii. Securing your Child in the Child Restraint
Use Infant Insert
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is 0-9 months or until they
outgrow the insert. The infant
insert increases side impact
protection.
16
-1
16
-2
16
3 3
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
Remove the infant insert
1
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion can be used
2
separately without being
attached to the insert to
bolster the infant's back
for more comfort.
2 2
14