Recline Adjustment; Height Adjustment - Joie every stage fx Manual De Instrucciones

Recline Adjustment

see images -
3 4
Press the recline adjustment handle,
and adjust the child restraint to the
proper position.
3
The recline angles are shown as
4
There are two recline angles 5-6 for
baby mode, they are marked as blue
triangles.
There are four recline angles 1-4 for
toddler mode and junior mode,
they are marked as red triangles.
Angle indication: with top and bottom
triangles aligned.
!
Make sure that vehicle seat belt will
be retightend when adjusted in
reclining position and vice versa if
seat was already buckled up
properly previously.
9
3
4

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
5 6
Please adjust the head support and shoulder harnesses to proper height
according to the child's height.
!
When used in baby mode, the shoulder harness height must be even with
-1
child's shoulders.
5
!
When used in toddler mode, the shoulder harness height must be even with
-2
child's shoulders.
5
!
When used in junior mode, the shoulder belt guides must be even with
-3
child's shoulders.
5
If the shoulder harnesses are not at proper height, the child may be thrown
from the child restraint when there is an accident.
5
Squeeze the head support adjustment lever, meanwhile pull up or push down
the head support until it snaps into one of the 10 positions.
The head support positions are shown as
!
Side wings are able to open while the head support is adjusted to the 6
position.
6
6
th
1
10