Operation; Control Panel Operation; Menu Map; Configuration (Dmx) - Chauvet DJ SWARM 5FX Manual De Usuario

Ocultar thumbs Ver también para SWARM 5FX:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the
life of your laser. Always disconnect the Swarm™ 5 FX from power when not in use.
Control Panel

Operation

Menu Map

Mode
DMX Mode
Automatic Mode
Sound-Active Mode
Slave Mode
Configuration
(DMX)

Starting Address

Swarm™ 5 FX User Manual
To access the control panel functions, use the four buttons located underneath the
display. When the product is on, the LED monitor on the rear panel will show the current
operating mode (standalone or DMX). The product will retain the last saved settings when
powered off.
Button
<FUNC>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Programming Steps
d001—d506
AUT0—AUT6
S 1—S100
SOU0—SOU6
SLA
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a DMX starting address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Swarm™ 5 FX uses up to 9 DMX channels in its 9-channel DMX mode, which
defines the highest configurable address to 504.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <FUNC> repeatedly until d001—d506 blinks on the display.
2.
Use <UP> or <DOWN> to select the starting address.
3.
Press <ENTER> and the DMX indicator light turns on.
Function
Description
Selects the DMX starting address
Selects auto program and speed
Sound-Active modes
Slave mode
Page 15 of 60

Publicidad

Tabla de contenido
loading

Tabla de contenido