Steren AUD-765 Manual De Instrucciones página 6

HOW TO USE (WITH A MP3 PLAYER)
To begin using the headphones, follow these steps:
1.- Unpack the headphones and place a AAA battery into the bat-
tery compartment.
2.- Insert the 3,5mm plug into the headphones input jack of the
MP3 player.
3.- Put the headphones in your ears.
4.- Turn the MP3 player on and begin the playback.
5.- Now you can hear the sounds in the headphones.
6.- To activate the noise canceling system, place the power
switch to ON position, the system will be activated and the
noises will be cancelled.
7.- When you don't want to use the headphones, turn it off.
The headphones can work even if the noise canceling sys- The headphones can work even if the noise canceling sys-
tem is deactivated. tem is deactivated.
The power switch is located in the back of the left head- The power switch is located in the back of the left head-
phone. phone.
SPECIFICATIONS
Miniplug 3.5 mm stereo connector
Sensitivity: 119db to 1kHz
Maximum power output: 100mW
Cable length: 1,2m
Product design and specifi cations are subject to change Product design and specifi cations are subject to change
without previous notice without previous notice
ENGLISH-3