IFU_KR_KETTLE_NC00019203_NAFTA_Mise en page 1 10/11/10 10:40 Page7
BEFORE USING FOR THE FIRST TIME
n
Remove all packaging and accessories both inside and outside the
kettle.
n
Adjust the length of the power cord by coiling the excess under the
base. The powercord should extend from the base through the slot in the
back. (fig. 1)
n
Rinse the inside of the kettle and the limescale filter (located in the
spout) several times. Boil 2 or 3 kettles of water and discard to remove
all manufacturing residues and dust.
n
Wipe the outside of the kettle and the base with a clean damp cloth. To
avoid damage to the electronics, avoid exposing the base of the kettle
or the bottom of the kettle to excess water.
USING YOUR KETTLE
1) Place the kettle base on a stable, clean surface away
from heat sources.
n
The kettle, kettle base, and limescale filter are specifically designed to be
used together and other accessories not designed for use with the kettle
should not be used.
2) To open the lid:
n
Press the button on the handle (fig. 2)
3) Fill the kettle with the desired amount of water
n
Lift the kettle off the base, then fill with water. Never use without water
or fill with liquids other than water. When filling the kettle, take care to
not expose the electrical connections at the bottom of the kettle to
water. The kettle cannot be immersed in water.
n
Fill through the spout by pressing the trigger button on the handle to flip
the spout cover open. Do not fill the kettle beyond the maximum level, or
below the minimum level marked on the water level indicator. If the kettle
is overfilled, boiling water may splash outside of the kettle. The kettle
does not need to be filled to the maximum level if less water is desired.
The amount of scale that develops depends on the hardness of your
water and how frequently the kettle is used. Descale regularly, preferably
at least once a month, more often if your water is very hard.
n
Always close the lid and spout cover once the kettle is filled.
English
(fig. 3).
7