General Informations; Manual Purpose; Terminology And Symbol Legend; Product Identification - Clean Track NANOscrub Manual De Instrucciones

2. GENERAL INFORMATION

2.1 MANUAL PURPOSE

To make it easier to read about and look up vari-
ous subjects, refer to the table of contents at the
beginning of the section in your language.
This manual has been prepared by the manufac-
turer and is an integral part of the product. As
such, it must be kept in a safe place for the ma-
chine's entire service life until demolition.
The customer must ensure that machine operators
have read or are familiar with the contents of this
manual so that they strictly follow the instructions
described herein.
Constant compliance with the instructions provided
in this manual is the only way to guarantee the
best results in terms of safety, performance, ef-
ficiency and service life of the product you now
own. Non-compliance with these rules may cause
injuries to people and damage to the machine, the
scrubbed surface and the environment: in no case
can such injuries or damage be attributed to the
manufacturer.
This manual refers in detail to the machine and
provides instructions and descriptions only about
the battery and the battery charger provided.

2.2 TERMINOLOGY AND SYMBOL LEGEND

For the sake of clarity and to efficiently highlight
the various aspects of the instructions provided,
terms and symbols were used that are defined and
illustrated here below:
- Machine. This definition replaces the commercial
name to which this manual refers.
- Operator. 'operator' means the person or per-
sons given the task of installing, operating, adjust-
ing, maintaining, cleaning, repairing or transporting
machinery.
- Technician. A technician is considered a person
who has the experience, technical education, legis-
lative and regulatory knowledge that allows him to
carry out any type of required work, and the abil-
ity to recognise and to avoid possible risks during
machine installation, and maintenance.
☞ - INDICATION SYMBOL Particularly important
information to avoid machine malfunctions.
• - ATTENTION SYMBOL Very important infor-
mation to avoid serious damage to the machine
and to the environment in which it operates.
• - DANGER SYMBOL Vital information to avoid
serious (or extreme) consequences affecting the
health of persons and causing damage to the prod-
uct and the environment in which it operates.

2 - GENERAL INFORMATIONS

27
Total weight (ready to operate)
Max. working range incline 2%
(Max. transporting range incline 10%)
Rated power brush drive
Rated power suction turbine
2.3

PRODUCT IDENTIFICATION

The nameplate located under the dashboard,
above the battery connector, contains the in-
formation.

2.4 SPECIFIC USE

This appliance is suited for the commercial
use, e.g. in hotels, schools, hospitals, factories,
shops, offices, and rental companies.
This machine is a floor scrubber-drier: it must be
used to scrub and to vacuum liquids of flat, rigid,
horizontal, smooth or moderately rough and uni-
form floors that are free from obstacles in both
civic and industrial environments. Any other use
is prohibited.
Please refer very carefully to the safety information
reported in this manual.
The scrubber-drier distributes a quantity of a
water and detergent solution (adjustable) on the
surface to be cleaned, while the brushes remove
any dirt on the ground. The machine's suction sys-
tem, using a ground squeegee, perfectly dries the
liquids and the dirt just removed from the front
brushes in a single pass.
By efficiently combining a cleaning detergent with
various types of brushes (or abrasive disks), the
machine can adapt to all the various combinations
of floors and dirt.

2.5 TECHNICAL MODIFICATIONS

The manufacturer reserves the right to make tech-
nical modifications to the product, without prior
notice, in order to make the necessary technical
upgrades or improvements. For this reason, some
details of your machine may be different from the
information in the sales catalogues or from the il-
lustrations presented in this booklet. However, this
will not reduce safety or invalidate the information
supplied to this regard.