Recommended Spare Parts; Operating Checks Informations; The Machine Doesn'T Work; The Brush Don'T Rotate - Clean Track NANOscrub Manual De Instrucciones

not performed.

8.10 RECOMMENDED SPARE PARTS

You'll always be able to use your machine as ef-
ficiently as possible by maintaining a stock of the
most common consumable materials and by sched-
uling routine and extraordinary maintenance. Con-
tact your dealer for a list of these spare parts.
9. OPERATING CHECKS

9.1 THE MACHINE DOESN'T WORK

 The key isn't inserted or correctly turned.
 Insert and turn the key to position ON.
 The battery connector is disconnected or poorly
attached to the main wiring connector.
 Firmly connect the two connectors.
The machine is charging.
 Complete the charging operation.
 The batteries are discharged.
 Charge the batteries.

9.2 THE BRUSH DON'T ROTATE

 The brush motor switch is not selected.
 Press the button to activate the brushes.
 The brush motor thermal breaker tripped; the
motor overheated.
 Troubleshoot the cause (cords or similar items
that impede movement, surface too rough, etc.) and
press the reset breaker (the first from the top).
 The transmission belt is broken.
 Replace it.
 The motor relay or the brush motor is broken.
 Replace it.
9.3 NOT ENOUGH OR TOO MUCH CLEANING

SOLUTION

The solution water tank is empty.
 Fill the solution water tank after having emptied
the recovery tank.
 The solenoid valve switch is in the OFF position
 Set the solenoid valve switch to the ON position
 The solution water valve is is closed or almost
closed.
 Adjust/increase the detergent solution outlet flow
by turning the flow adjustment lever.
 The solution water filter is dirt and clogged in
some point.
 Open the filter and clean it removing the dirt.

9.4 NO SUCTION

 The suction hose is not connected to the squee-
gee.
 Connect it correctly.
 The suction hose or the squeegee conduit are
obstructed.
 Clean out and remove any obstructions from the
8 - MAINTENANCE INFORMATIONS
conduits.
 The suction motor is turned off.
 Activate it.
 The recovery tank is full.
 Empty it.
 The suction motor is not receiving electric power
or is burned.
 Check the connections and, for the latter case,
replace the motor.

9.5 INSUFFICIENT SUCTION

 The cover of the suction compartment is not per-
fectly closed.
 Close it correctly.
 The suction hose or the squeegee conduit are
obstructed.
 Clean out and remove any obstructions from the
conduits.
9.6 THE BRUSH MOTOR OR THE SUCTION
MOTOR DOESN'T STOP
 Stop the machine, cutting off the main power sup-
ply and disconnecting the main battery connector,
and contact the technical service centre.
9.7 THE SQUEEGEE DOESN'T CLEAN OR DRY
EFFICIENTLY
 The squeegee blades are worn or are dragging
solid dirt.
 Replace or clean them.
 The squeegee adjustment is not correct; the ad-
vancement must be exactly perpendicular to the
running direction.
 Adjust the squeegee.
 The suction hose or the squeegee conduit are
obstructed.
 Clean out and remove any obstructions from the
conduits.
9.8 THE BATTERY CHARGER DOESN'T WORK
 The battery charge doesn't start .
 Check that the battery charger is connected to the
battery. Consult the battery charger manual.
9.9 THE BATTERIES DO NOT CHARGE OR DO
NOT HOLD A CHARGE
 The batteries are new and do not generate 100%
of the rated performances.
The accumulator reaches the maximum perfor-
mance after 20-30 complete charge cycles.
 The electrolyte has evaporated and does not
completely cover the plates.
 Check the battery manufacturer's use and main-
tenance manual.
 There are significant differences in density among
the various elements.
 Replace the damaged battery.
47