The
command indicates to the program to stop for an
instant. This is used to signal positions in formulas where
you wish for a result to be displayed.
These two examples will be used in the previous proce-
dure:
Now the program is complete.
Saving Programs
In order to save programs you must be in WRT mode which
you can enter by pressing the
button.
When you press the
button the system will change
to WRT mode. The remaining number of instructions will
be displayed on the LCD screen. The number of remaining
instructions will diminish as you introduce formulas, digits,
and other data as well as when expand the memory. If you
don't have any programs stored in the memory, you should
have 26 memory slots available. The number of instructions
you can store should be 400.