Publicidad
Idiomas disponibles
Idiomas disponibles
Kit Preparation
From the factory radio/climate control panel:
1. Remove the (4) Phillips screws securing the climate controls, and then remove.
2. Unclip and remove the hazard/passenger airbag light assembly.
To the 95-7339 trim panel:
1. Secure the climate controls using the
factory hardware.
2. Attach the hazard/passenger airbag
light assembly.
3. Attach the (6) panel clips provided.
Continue to Kit Assembly
®
95-7339
ISO DDIN radio provision
1. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation.
3. Secure the completed assembly to
the sub-dash.
4. Reassemble the dash in reverse
order of disassembly using the
95-7339 trim panel.
3
Kit Assembly
(Figure A)
Publicidad
