Festo Compact performance CP-FB8-E Manual De Instrucciones página 11

1 User
The CP fieldbus node 8 is designed exclusively for use as a
slave on the Allen−Bradley RIO network. The limit values of
the technical specifications must be observed.
Please refer to the manual P.BE VIFB8−10... for detailed
information.
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use power supplies which guarantee reliable electri
cal isolation of the operating voltage as per IEC/DIN
EN 60204−1. Consider also the general requirements
for PELV circuits in accordance with IEC/DIN EN
60204−1.
S Connect an earth conductor of sufficient cross−sec
tional area to the terminal marked with the earth
symbol.
S Only operate a node which is completely fitted and
electrically wired.
If to be used as an explosion−protected operating de
vice, make sure that:
S electrical contacts are not disconnected under ten
sion
S the completely fitted valve terminal with all plugs,
adapters and protective caps complies at least with
protection class IP 64.
Festo CP−FB8−E 0503e English
instructionsEnglish
11