Configuring The Pc In The Ad-Hoc Mode; Configuring The Cisco Wlan Card - Sirona CEREC MC XL Manual Del Usuario

3 Configuring the PC in the Ad-hoc mode

Configuring the CISCO WLAN card

Opening network connections
Opening network connections
Activating the CISCO WLAN card
Activating the WLAN card
Configuring the network properties of the Cisco WLAN card
Configuring the network properties
of the WLAN card
16
Operating MC XL via WLAN in the Ad-hoc mode CEREC / inLab MC XL
3
Configuring the PC in the Ad-hoc
mode
The acquisition units are equipped with two different WLAN cards.
You can see which WLAN card is installed by checking the manufacturer icon
at the bottom right in the task bar.
Go on to the chapter entitled "Configuring the CISCO WLAN card" [ 16].
Go on to the chapter entitled "Configuring the LINKSYS WLAN card" [ 21].
3.1 Configuring the CISCO WLAN card
Click "Start" / "Settings" / "Control panel" in the task bar.
1.
Double-click the "Network Connections" icon in the "Control
2.
panel" window.
The "Network Connections" window then opens.
Right-click the "Wireless Network Connection" with the device
1.
name Cisco Aironet 02.11a/b/g Wireless Adapter.
Select "activate".
2.
Right-click the "Wireless Network Connection" with the device
1.
name Cisco Aironet 02.11a/b/g Wireless Adapter.
Select "Properties".
2.
The window with the Network Properties then opens.
Sirona Dental Systems GmbH
61 90 545 D 3439
D 3439.031.03.01.02 06.2007