Kit Assembly - Metra 95-6532B Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the (4) supplied white panel
clips to the radio housing.
(Figure A)
2. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in the
reverse order of disassembly using
the 6532 radio trim panel instead
of the factory radio panel.

Kit Assembly

(Figure A)
95-6532B
(Figure B)
3