Action Principles; Concepts Of Illuminance Scales; Conversion Formula For Illuminance And Light Intensity; Typical Practice Cases - KPS -LX30LED Manual De Funcionamiento

4.2 Action principles

4.2.1 Concepts of illuminance scales

ter, all points of which are one meter from a uniform source of one candela.
One lux (lumen) indicates the illuminance got on a surface of one square me-
foot, all points of which are one foot from a uniform source of one candela.
4.2.2 Unit conversion for illuminance scales
One foot-candle (Fc) indicates the illuminance got on a surface of one square
• 1 lux = 0,09290 Fc
• 1 Fc = 10,764 lux

4.2.3 Conversion formula for illuminance and light intensity

• E = I / r 2
When
- E: illumination value (unit: Lux)
- I: light intensity of the light source (unit: cd)
During the measurement, the minimum distance between the luminous surface
- r: distance from the luminous surface of light source to the optical detector
(unit: m).

4.3 Typical practice cases

of light source and the opto-sensor should be more than 15 times greater than
maximum size of the luminous surface (or opto-sensor).
move the protection cover of the KPS-LX30LED multifunctional light meter
• In the following practice cases, the user stands under a light source. Re-
sensor and place it at right angle to the light source, as shown in figure 4-1.:
KPS-LX30LED • Digital light meter
30