Publicidad
Idiomas disponibles
Idiomas disponibles
EN
direct sunlight in the car. Otherwise, the cover, metal
and plastic parts could become too hot for your
child's skin.
WARNING :
Switch off the front passenger
airbag when your child is sitting in a rearward-facing
position in the front passenger seat.
WARNING :
Switch on the front passenger airbag
when your child is sitting in a front-facing position and
place the passenger seat in the rearmost position.
Pearl Pro i-Size and your child
1. Never leave your child unattended.
2. Always secure your child with the harness belt.
3. Check to make sure the headrest is adjusted to the
proper height.
4. Before every use, make sure the harnesses are not
damaged or twisted.
5. Make sure you can fit no more than one finger
between the harnesses and your child (1cm). If there
is more space than 1 cm, tighten the harness belt
further.
WARNING :
When using the Pearl Pro i-Size in a
rearward-facing position, the maximal recline
position may only be used for a child with a
maximum length of 97 cm.
16
Pearl Pro i-Size maintenance instructions
1. The cover can be removed for washing. If the cover
needs to be replaced at any time, only use official
Bébé Confort fabrics.
2. Keep the Pearl Pro i-Size clean. Do not use lubric.
Environment
Keep all plastic packaging materials out of reach of
your child to avoid the risk of suffocation.
For environmental reasons, when you have stopped
using this product, we ask that you dispose of the
product in the proper waste facilities in accordance
with local legislation.
Questions
If you have any questions, contact your local
Bébé Confort retailer (see www.bebeconfort.com
for contact information). Make sure that you have
the following information on hand:
- Serial number at the bottom of the orange ECE
sticker;
- Make and type of car and seat on which the Pearl Pro
i-Size is used;
- Age, height and weight of your child.
Publicidad
