Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2041 kg)
Weight Distributing
4500 lb. (2041 kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76438, 84438, CQT76438
Max Tongue
Weight
Weight
675 lb. (306 kg)
675 lb. (306 kg)
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 18
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76438NP
02-01-21
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 76438

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear excepted.
  • Página 2: Installation Instructions

    Max Tongue Weight Weight Carrying 4500 lb. (2041 kg) 675 lb. (306 kg) Weight Distributing 4500 lb. (2041 kg) 675 lb. (306 kg) Hitch Illustration ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 18 76438NP 02-01-21 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 18...
  • Página 4 (2) screws from panel. Using 10 mm socket, remove two bolts from panel. Remove the underbody panel. Flat head screwdriver Phillips screwdriver 10 mm socket ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 18 76438NP 02-01-21 Rev. A...
  • Página 5 3. Install hitch: Raise the hitch into position and align it with weldnut location. Loosely install M12 bolts ①, ½’’ conical washers ②, ½’’ lock washers ③, and ½‘’ flat washers ④ to the hitch, as shown in Figure 1. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 18...
  • Página 6 5. Trim underbody panel: Using utility knife and tape, mark and trim the panel as shown in Figure 2. 6. Reinstall the underbody panel with fasteners removed in step 1, except the rearmost two fasteners due to trimming. 8’’ 3’’ ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 18 76438NP 02-01-21...
  • Página 7: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 8 Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.horizonglobal.com NUMÉROS DE PIÈCES : 76438, 84438, CQT76438 http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 25 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 9 Instructions d’installation Ens. fixations : 76438F Portez toujours des LUNETTES DE SÉCURITÉ lors de l’installation d’un attelage ① Qté. (6) Boulon NUMÉROS DE PIÈCE : 76438, 84438, CQT76438 M12x1.25x35, CL8.8 Dents de la rondelle ② Qté. (4) Rondelle conique conique orientées Visserie similaire 1/2‘’...
  • Página 10 (2) vis du panneau. À l’aide d’une douille 10 mm, retirer deux (2) boulons du panneau. Enlever le panneau décoratif. Tournevis à tête plate Tournevis Phillips 10 mm Douilles ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 10 de 18 76438NP 02-01-21 Rev. A...
  • Página 11 3. Installer l'attelage : Soulever l’attelage en position et l’aligner sur les écrous soudés. Installer lâchement les boulons M12 ①, les rondelles coniques 1/2 po ②, les rondelles freins 1/2 po ③ et les rondelles plates 1/2 po ④ sur l’attelage, comme illustré sur la Figure 1. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 11 de 18...
  • Página 12 5. Découper le panneau décoratif : À l’aide d’un couteau utilitaire, découper le panneau comme illustré sur la Figure 2. 6. Réinstaller le panneau avec la visserie retirée à l'étape 1. 8’’ 3’’ ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 de 18 76438NP 02-01-21...
  • Página 13: Garantía Limitada De Por Vida

    GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 14: Equipo Necesario

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Sitio web: www.horizonglobal.com NÚMEROS DE PARTES: 76438, 84438, CQT76438 http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- TechnicalSupport@horizonglobal.com product Aplicaciones: Tiempo de instalación: 25 min Años Marca...
  • Página 15 Instrucciones de instalación Kit de fijadores: 76438F Siempre usar GAFAS DE SEGURIDAD al instalar el enganche ① Cant. (6) Perno NÚMEROS DE PARTE: 76438, 84438, CQT76438 M12x1.25x35, CL8.8 El lado de los dientes Fijadores ② Cant. (4) Arandela cónica de la arandela cónica iguales 1/2‘’...
  • Página 16 (2) tornillos del panel. Con un cubo de 10, quitar dos pernos del panel. Quitar el panel de apariencia. Destornillador cabeza plana Destornillador phillips Tubos 10 mm ©2021 Horizon Global™ Corp. Impreso en México Hoja 16 de 18 76438NP 02-01-21 Rev. A...
  • Página 17 3. Instalar el enganche: Levantar el enganche a su posición y alinearlo con la ubicación de la tuerca de soldar. Instalar sin apretar los pernos M12 ①, las arandelas cónicas de ½'' ②, las arandelas de seguridad de ½" ③ y las arandelas planas de ½" ④ en el enganche, como se muestra en la Figura 1. ©2021 Horizon Global™ Corp. Impreso en México Hoja 17 de 18...
  • Página 18 5. Recortar el panel de apariencia: Con un cuchillo, recortar el panel como se muestra en la Figura 2. 6. Volver a instalar el panel con los fijadores que se quitaron en el paso 1. 8’’ 3’’ ©2021 Horizon Global™ Corp. Impreso en México Hoja 18 de 18 76438NP 02-01-21...

Este manual también es adecuado para:

84438Cqt76438