Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1587 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76471, 84471, CQT76471
Max Tongue
Weight
Weight
525 lb. (238 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 24
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76471NP
5-6-21
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 76471

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2: Installation Instructions

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 3500 lb. (1587 kg) 525 lb. (238 kg) Weight Distributing Hitch Illustration ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 24 76471NP 5-6-21 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 24...
  • Página 4 Figure 4. Repeat steps on passenger side. 2. Remove rear bumper fascia - a.) Using a T15 star driver, remove 4 screws from bottom center fascia. Set fasteners aside to be reinstalled. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 24...
  • Página 5 Only remove as far as shown in Figure 2. Figure 2 Figure 2 ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 24 76471NP 5-6-21 Rev. A...
  • Página 6 Return bumper beam to owner and set bolts and nuts aside for later use. See Figure 1. Bumper beam End panel Existing M10 Nuts (4) Places Existing M10 Bolts (4) Places Figure 1 Exhaust Hanger Bracket ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 24 76471NP 5-6-21 Rev. A...
  • Página 7 5. Trim fascia –Locate the center of the fascia. Using a tape measure, marker, and utility knife, cut a notch in the bottom of fascia approximately 4.25’’ wide by 3.5” tall. See Figure 3. Note: Be sure area is clear of all electrical wiring before trimming. Area to trim 4.25” 3.50” Figure 3 ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 7 of 24 76471NP 5-6-21 Rev. A...
  • Página 8 6. Reinstall fascia – Reconnect all wiring first. Then reinstall the fascia, wheel well trim light and taillight covers using original hardware removed in steps 1 and 2. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 8 of 24...
  • Página 9: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 10 Instructions d’installation Numériser pour des instructions avec NUMÉROS DE PIÈCES : 76471, 84471, CQT76471 PHOTOS ou visiter Site Internet: www.horizonglobal.com http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 90 min Années Marque Modèles La valeur indiquée ci-dessus est la durée...
  • Página 11 Instructions d’installation Panneau NUMÉROS DE PIÈCE : 76471, 84471, CQT76471 Écrous à embase M10 existants d'extrémité (4) emplacements Figure 4 Zone à découper Boulons M10 existants (4) Emplacements 4,25 po Figure 1 Support de crochet d’échappement 3,5 po Pièces de fixation Portez toujours des LUNETTES DE SÉCURITÉ...
  • Página 12 2. Retirer le carénage de parechocs arrière - a.) À l’aide d’un tournevis à empreinte cruciforme T15, retirez les (4) vis de carénage inférieur central. Posez les fixations à réinstaller à l’écart. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 de 24...
  • Página 13 Retirez uniquement dans la mesure illustrée dans la Figure 2. Figure 2 Figure 2 ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 13 de 24 76471NP 5-6-21 Rev. A...
  • Página 14 écrous à l’écart pour une utilisation ultérieure. Consultez la figure 1. faisceau pare-chocs Écrous à embase M10 existants Panneau d'extrémité (4) emplacements Boulons M10 existants (4) Emplacements Figure 1 Support de crochet d’échappement ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 14 de 24 76471NP 5-6-21 Rev. A...
  • Página 15 4,25 po de largeur par 3,5 po de hauteur.Voir la figure 3. Remarque : Avant de découper, assurez-vous que la zone ne contient aucun câblage électrique. Zone à découper 4.25” 3.50” Figure 3 ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 15 de 24 76471NP 5-6-21 Rev. A...
  • Página 16 6. Réinstaller le carénage – Commencez par rebrancher tout le câblage. Pour réinstaller le carénage, la lampe de garniture de passage de roue et les couvercles de feux rouges arrière en utilisant la quincaillerie d’origine retirée aux étapes 1 et 2. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 16 de 24...
  • Página 17: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 18: Equipo Necesario

    Instrucciones de instalación Escanear para instrucciones de la instalación paso por NÚMEROS DE PARTES: 76471, 84471, CQT76471 paso con FOTO, o visitar Sitio web: www.horizonglobal.com http://qr.towingproducts. net/qrproducts/qr- Assistance técnica: 800-632-3290 product TechnicalSupport@horizonglobal.com Aplicaciones: Tiempo de instalación: 90 min. Años Marca...
  • Página 19 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2021 Horizon Global™ Corp - Impreso en México Hoja 19 de 24...
  • Página 20 2. Quitar la fascia del parachoques trasero: a.) Con un destornillador de estrella T15, quitar (4) tornillos de la fascia central inferior. Colocar los fijadores a un lado para su reinstalación. ©2021 Horizon Global™ Corp. Impreso en México Hoja 20 de 24...
  • Página 21 Quitar únicamente lo que se muestra en la Figura 2. Figura 2 Figura 2 ©2021 Horizon Global™ Corp. Impreso en México Hoja 21 de 24 76471NP 5-6-21 Rev. A...
  • Página 22 Ver la Figura 1. haz de parachoques Tuercas de brida M10 existentes Panel final (4) lugares Pernos M10 existentes (4) lugares Figura 1 Soporte del colgante del escape ©2021 Horizon Global™ Corp. Impreso en México Hoja 22 de 24 76471NP 5-6-21 Rev. A...
  • Página 23 4.25" de ancho x 3.5" de alto. Ver la Figura 3. Nota: Verificar que el área esté libre de todo el cableado eléctrico antes de recortar. Área a recortar 4.25” 3.50” Figura 3 ©2021 Horizon Global™ Corp. Impreso en México Hoja 23 de 24 76471NP 5-6-21 Rev. A...
  • Página 24 6. Volver a instalar la fascia: Volver a conectar todo el cableado primero. Luego, volver a instalar la fascia, la luz de la moldura del receptáculo de la rueda y las cubiertas de las luces traseras con las piezas originales que se quitaron en los pasos 1 y 2. ©2021 Horizon Global™ Corp. Impreso en México Hoja 24 de 24...

Este manual también es adecuado para:

84471Cqt76471