Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
4500 lb. (2041 Kg)
Weight Distributing
4500 lb. (2041 Kg)
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76499, 84499, CQT76499
Max Tongue
Weight
Weight
675 lb. (306 Kg)
675 lb. (306 Kg)
LIMITED LIFETIME WARRANTY
1.
Limited Lifetime Warranty ("Warranty"). Cequent Performance Products, Inc. ("We",
"Us" or "Our") warrants to the original consumer purchaser only ("You" or "Your") that the
product will be free from material defects in both material and workmanship, ordinary wear
and tear excepted. The Warranty is valid only if (a) the products are returned to Us for
inspection and testing; (b) Our inspection discloses to Our satisfaction that any alleged
nonconformance are material and have not been caused by misuse, neglect, wear and tear,
improper installation, unsuitable storage, improper repair, alteration, or accident; and (c) the
products were installed, maintained and used in accordance with Our instructions. THE
WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (OTHER THAN THE WARRANTY OF TITLE AS PROVIDED BY THE
UNIFORM COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING
WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY
DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 9/2014
Sheet 1 of 21
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76499NP
5-20-21
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Horizon Global 76499

  • Página 1 Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this Warranty. brakes and DO NOT speed up. Rev 9/2014 ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 1 of 21 76499NP 5-20-21 Rev. A...
  • Página 2: Installation Instructions

    Max Tongue Weight Weight Carrying 4500 lb. (2041 Kg) 675 lb. (306 Kg) Weight Distributing 4500 lb. (2041 Kg) 675 lb. (306 Kg) Hitch Illustration ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 21 76499NP 5-20-21 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 21...
  • Página 4 T15 torx, each side. taillights to help prevent scratching the vehicle. Remove the screws that connect the wheel well liner fascia T15 torx, each side. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 21 76499NP 5-20-21...
  • Página 5 7. Re-install fascia - Reverse the process used in step 2 to re-install the fascia. Be sure to reconnect any plugs that were disconnected. The hitch access panel may be replaced when hitch is not in use. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 21...
  • Página 6 4. Install hitch – Raise the hitch into position, aligning the slots in the hitch with the attachment holes in the vehicle frame. Using the supplied pull wires install the supplied carriage bolts and spacers into the vehicle frame, install the conical washers (teeth side toward hitch) and nuts onto the carriage bolts. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 21...
  • Página 7 7. Re-install fascia - Reverse the process used in step 2 to re-install the fascia. Be sure to reconnect any plugs that were disconnected. The hitch access panel may be replaced when hitch is not in use. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 7 of 21...
  • Página 8: Garantie À Vie Limitée

    Les cours de l’État situées dans le comté d’Oakland, Michigan, constituent les autorités judiciaires exclusives relativement à tout litige relevant de cette Garantie. Rev 9/2014 ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 8 de 21 76499NP 5-20-21...
  • Página 9: Équipement Requis

    4500 lb. (2041 Kg) 675 lb. (306 Kg) de charge Répartition de charge 4500 lb. (2041 Kg) 675 lb. (306 Kg) Illustration de l'attelage ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 9 de 21 76499NP 5-20-21 Rev. A...
  • Página 10 Always wear SAFETY GLASSES Visserie : 76499F Instructions d’installation when installing hitch ① Qté (4) Boulon de carrosserie NUMÉROS DE PIÈCES : 76499, 84499, CQT76499 1/2”-13 x 1 1/2” GR5 Qté (4) Espaceur Trou d'accès ② 1/4” x 1” x 2”...
  • Página 11 Retirer les vis qui fixent le carénage de la doublure de passage de roue à l’aide d’un embout Torx T15, de chaque côté. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 11 de 21 76499NP 5-20-21 Rev.
  • Página 12 2. En commençant par le passage de roue, tirer le carénage avec soin pour le dégager. Débrancher tous les connecteurs électriques qui y sont attachés. Mettre le carénage de côté. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 de 21...
  • Página 13 (côté denté orienté vers l’attelage) et les écrous sur les boulons de carrosserie. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 13 de 21...
  • Página 14 7. Réinstaller le carénage - Inverser la procédure utilisée à l’étape 2 pour réinstaller le carénage. S’assurer de reconnecter tout connecteur qui a été débranché. Le panneau d'accès de l’attelage peut être remis en place lorsque l'attelage n'est pas utilisé. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 14 de 21...
  • Página 15: Garantía Limitada De Por Vida

    Oakland, Michigan tendrán la jurisdicción exclusiva para cualquier disputa que surja • con respecto a esta garantía. sujete el volante lo más firme posible. NO aplique los frenos y NO Rev 9/2014 aumente la velocidad. ©2021 Horizon Global™ Corp. Impreso en México Hoja 15 de 21 76499NP 5-20-21 Rev. A...
  • Página 16: Aplicaciones

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Website: www.horizonglobal.com http://qr.towingproducts. NÚMEROS DE PARTES: 76499, 84499, CQT76499 net/qrproducts/qr- Technical Assistance: 800-632-3290 product TechnicalSupport@horizonglobal.com Aplicaciones: Tiempo de instalación: 75 min. Años Marca Modelos...
  • Página 17 Kit de fijadores: 76499F Siempre usar GAFAS DE SEGURIDAD al instalar el enganche ① Cant. (4) Perno de carruaje NÚMEROS DE PARTE: 76499, 84499, CQT76499 1/2”-13 X 1 1/2” GR5 Orificio de acceso Cant. (4) Espaciador ② 1/4” x 1” x 2”...
  • Página 18 Quitar los tornillos que conectan el revestimiento del receptáculo de la rueda a la fascia con la broca torx T15 ©2021 Horizon Global™ Corp. Impreso en México Hoja 18 de 21 76499NP 5-20-21 Rev.
  • Página 19 2. Con cuidado, comenzar a halar la fascia desde el receptáculo de la rueda. Desconectar todos los conectores eléctricos que están conectados. Colocar la fascia a un lado. ©2021 Horizon Global™ Corp. Impreso en México Hoja 19 de 21 76499NP 5-20-21 Rev.
  • Página 20 Con los cables de insertar suministrados, instalar los pernos de carruaje y los espaciadores en el bastidor del vehículo, instalar las arandelas cónicas (el lado dentado hacia el enganche) y las tuercas en los pernos de carruaje. ©2021 Horizon Global™ Corp. Impreso en México Hoja 20 de 21...
  • Página 21 7. Volver a instalar la fascia: Invertir el proceso utilizado en el paso 2 para reinstalar la fascia. Asegurarse de volver a conectar los tapones que se desconectaron. El panel de acceso del enganche puede ser reemplazado cuando el enganche no está en uso. ©2021 Horizon Global™ Corp. Impreso en México Hoja 21 de 21...

Este manual también es adecuado para:

84499Cqt76499

Tabla de contenido