Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions for
your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted to your
vehicle periodically.
ALWAYS read, understand and follow all warnings and instructions for
your vehicle and for other accessories you will use with your hitch
BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1588 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold the
steering wheel as steady as possible. DO NOT apply your brakes and DO
NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76460, 84460, CQT76460
Max Tongue
Weight
Weight
350 lb. (158.8 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 18
76460NP
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
03-18-21
Rev. A

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Horizon Global 76460

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2: Installation Instructions

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 3500 lb. (1588 kg) 350 lb. (158.8 kg) Weight Distributing Hitch Illustration ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 18 76460NP 03-18-21 Rev. A...
  • Página 3 Ne jamais utiliser une torche pour découper un accès ou un trou de fixation. Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 18...
  • Página 4 1. Remove bottom cover - Using a 10 mm socket and flat head screwdriver remove (16) bolts and (4) rivets respectively from the bottom cover. Remove the cover and keep for reinstallation. Rivets ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 18 76460NP 03-18-21 Rev.
  • Página 5 3. Trim lower fascia – Using a tape measure, marker, and utility knife, measure, mark, and trim the lower fascia as shown in Figure 3. of Vehicle �� ” �� �� ” �� Figure 3 ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 18 76460NP 03-18-21 Rev. A...
  • Página 6 5. Tighten all 7/16”-14 Gr 5 fasteners with torque wrench to 50 Ft.Lb. (68 N*M). Proper torque is needed to keep the hitch secure to the vehicle when towing. 6. Reinstall the bottom cover. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 18 76460NP 03-18-21 Rev.
  • Página 7: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de matières et de fabrication, exception faite de l’usure normale. Cette garantie n'est valide que Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES...
  • Página 8 Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter Site Internet: www.horizonglobal.com http://qr.towingprod NUMÉROS DE PIÈCES : 76460, 84460, CQT76460 ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 40 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 9 Visserie : 76460F Toujours porter des LUNETTES DE Instructions d’installation PROTECTION pour installer l'attelage. ① Qty. (4) Boulon de carrosserie NUMÉROS DE PIÈCE : 76460, 84460, CQT76460 7/16”-14x1.50 ② Qty. (4) Espaceur .188 ”x1”x 2” Longeron ③ Qty. (2) Rondelle conique 7/16”...
  • Página 10 1. Retirez le couvercle inférieur - À l'aide d'une douille de 10 mm et d'un tournevis à tête plate, retirez respectivement (16) boulons et (4) rivets du couvercle inférieur. Retirez le couvercle et conservez-le pour la réinstallation. Rivets ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 10 of 18 76460NP 03-18-21 Rev.
  • Página 11 3. Couper le fascia inférieur - À l'aide d'un ruban à mesurer, d'un marqueur et d'un couteau utilitaire, mesurez, marquez et coupez le fascia inférieur comme illustré à la figure 3. de véhicule �� ” �� �� ” �� Figure 3 ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 11 of 18 76460NP 03-18-21 Rev. A...
  • Página 12 5. Serrez toutes les fixations de 7/16 ”-14 Gr 5 avec une clé dynamométrique à 50 pi-lb. (68 N * M). Un couple de serrage approprié est nécessaire pour maintenir l’attelage fixé au véhicule lors du remorquage. 6. Réinstallez le capot inférieur. ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 12 of 18 76460NP 03-18-21 Rev.
  • Página 13: Garantía Limitada De Por Vida

    GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: "nuestro/a/s") garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará...
  • Página 14: Aplicaciones

    Escanear para instrucciones Instrucciones de instalación de la instalación paso por paso con FOTO, o visitar Sitio web: www.horizonglobal.com NÚMEROS DE PARTES: 76460, 84460, CQT76460 http://qr.towingproducts. Assistance técnica: 800-632-3290 net/qrproducts/qr- TechnicalSupport@horizonglobal.com product Aplicaciones: Tiempo de instalación: 40 min Años Marca...
  • Página 15: Del Vehículo

    Instrucciones de instalación Kit de fijadores: 76460F Siempre usar GAFAS DE SEGURIDAD al instalar el enganche ① Qty. (4) Perno de carruaje NÚMEROS DE PARTE: 76460, 84460, CQT76460 7/16”-14x1.50 ② Qty. (4) Espaciador .188 ”x1”x 2” Larguero del bastidor ③...
  • Página 16 1. Quite la cubierta inferior- con un dado de 10 mm y un destornillador de cabeza plana, retire (16) pernos y (4) remaches respectivamente de la cubierta inferior. Quite la cubierta y consérvela para reinstalarla. remache ©2021 Horizon Global™ Corp. Impreso en México Hoja 16 of 18 76460NP 03-18-21 Rev.
  • Página 17: L C Del Vehículo

    3. Recorte la fascia inferior- con una cinta métrica, un marcador y una navaja, mida, marque y recorte la fascia inferior como se muestra en la Figura 3. del vehículo �� ” �� �� ” �� Figura 3 ©2021 Horizon Global™ Corp. Impreso en México Hoja 17 of 18 76460NP 03-18-21 Rev. A...
  • Página 18 5. Apriete todos los sujetadores de 7/16 ”-14 Gr 5 con una llave dinamométrica a 50 Ft.Lb. (68 N * M). Se necesita la torsión adecuada para mantener el enganche unido firmemente al vehículo durante el remolque. 6. Vuelva a instalar la cubierta inferior. ©2021 Horizon Global™ Corp. Impreso en México Hoja 18 of 18 76460NP 03-18-21 Rev.

Este manual también es adecuado para:

84460Cqt76460

Tabla de contenido