Installing The Mounting Plate; Mounting The Light Fixture - Defiant DF-5909-WH Guía Para El Uso Y Cuidado

Installation (continued)
4

Installing the mounting plate

□
Place the mounting plate (D) against the
junction box.
□
Tighten the two mounting screws (BB) securely
to the junction box. If necessary, use the
screws that were removed from the existing
light fixture. Do not overtighten.
□
Firmly pull on the mounting plate (D) to ensure
it is securely attached to the junction box.
IMPORTANT: Use the larger mounting plate screws if the pre-
installed screws are too small for the junction box holes.
• Unscrew the mounting plate screws from the mounting plate
using a screwdriver.
• Remove the rubber gaskets from the mounting plate screws.
• Place the rubber gaskets on the larger mounting plate screws and
screw the screws into the mounting plate using a screwdriver.
5

Mounting the light fixture

NOTICE: The light fixture must securely snap onto the mounting
plate completely for the locking handle to close.
During the installation, DO NOT press against the
light panels (A) or the heat sinks (E). Move the light
panels (A) apart and apply pressure directly to the light
fixture housing.
□
Pull up on the locking handle (4) to unlock.
□
Align the back of the light fixture with the
mounting plate (D).
□
Firmly press the center of the light fixture
housing to securely snap the light fixture onto
the mounting plate (D). The light fixture must be
fully seated onto the mounting plate (D) all the
way around.
6
Locking the light fixture
□
Rotate the light fixture to the desired position.
□
Press down on the locking handle (4)
completely to secure the light fixture to the
mounting plate (D).
NOTICE: Gently pull on the light fixture to ensure it is securely
connected to the mounting plate.
D
4
D
4
7
Please contact 1-866-308-3976 for further assistance.
A
HOMEDEPOT.COM
D
BB
E