Kit Assembly - Metra 99-8246HG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the factory panel clips to the
radio housing trim panel.
2. Mount the pocket to the radio
brackets with the (4) supplied
#8 x 3/8" Phillips screws. (Figure A)
3. Mount the bracket/pocket assembly
to the housing trim panel with the
remaining (4) supplied #8 x 3/8"
screws. (Figure B)
4. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
6. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
99-8246HG

Kit Assembly

(Figure A) (Figure B)
3
(Figure C)