Important - Forno FFSGS6275-30 Guia De Instalacion

STEP 2: Cooktop Burners
a. Remove cooking grills and burner caps.
b. Lift off outer burner spreader.
c. Remove the factory installed natural gas nozzles from the center of the nozzle holders
using a 7mm socket wrench. Replace the LP injector in each nozzle holder. Tighten each
injector properly. Do not to over tighten the injector.
CAUTION
damage to components.
IMPORTANT: Each injector has a number indicating its flow diameter printed on the body. Consult the table below for
matching nozzles with cooktop burners.
CAUTION
burners. If the flame goes out by accident, need to turn off the valve immediately to cut off the gas supply.
Handle carefully when removing and replacing gas components. Use proper support to prevent
The Re-ignition system and automatic gas-cut-off system are not equipped on the cooktop
15
Position for NG
Position for LPG
Socket wrench