System Settings - Autopilot PX2 Instrucciones

ANALOG/DIGITAL SETUP
Before starting the display setup, you
must complete the Analog/Digital setup.
1. Using a pen or other small object,
press the recessed
cycle through the following options.

SYSTEM SETTINGS

The Systems Settings screen is where the
controller's overall setting are defined for
both zones.
1. Press or
SYSTEM SETTING menu.
2. Press to cursor through the
values and highlight the value you
want to change.
Value
Temperature unit
Power unit
Hour format
Time
Date
3. Press or
4. Repeat steps 2–3 to set all values.
5. Press to save the settings.
Hydrofarm.com
4
INSTRUCTIONS
button to
1
SET
ANALOG SETUP:
Each zone can support a maximum of 50 LED fixtures.
DIGITAL SETUP:
Each zone can support a maximum of 256 HID fixtures.
ANALOG AND DIGITAL SETUP:
Zone A can support 50 LED fixtures and
Zone B can support 256 HID fixtures.
to enter the
Options
F or C
% or W
12H or 24H mode
Hours/Minutes (AM/PM will adjust automatically)
Month/Day/Year
to select the correct setting, then press to confirm.
1