Publicidad
Idiomas disponibles
Idiomas disponibles
16"
(40.6 cm)
2-1/4"
(5.7 cm)
9" (22.9 cm)
3"
(7.6 cm)
1-1/2" O.D.
Product Information
Applicable product:
Bath with airjets, with drop-in flange
Fixture*:
Bathing well:
Basin area, bottom
42" (106.7 cm) x 20" (50.8 cm)
Basin area, top
51" (129.5 cm) x 24" (61 cm)
Weight
84 lbs (38.1 kg)
To overflow:
Water depth
14" (35.6 cm)
Capacity
60 gal (227.1 L)
* Approximate measurements for comparison only.
Drop-in cut-out
Blower
Heater
motor:
300 W
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
Blower motor is supplied with a 24" (61 cm) grounding-type
plug-in cord.
1034592-1-D
60" (152.4 cm)
2-1/2"
(6.4 cm)
K-1357-G
58" (147.3 cm) x 30" (76.2 cm)
V
Hz
120 V
60 Hz
120 V, 5 A, 60 Hz
20"
(50.8 cm)
1" (2.5 cm)
Notes
NOTICE: If the blower motor and check valve are relocated, the
following two procedures are required: 1. Provide two access
panels. Locate one access panel at the blower motor/control
location and the other access panel at the control box. 2. Relocate
the blower motor and the check valve together. Do not relocate one
without the other.
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
46 lbs/square foot (223 kg/square meter) loading.
A blower motor access panel is required.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
A
5 A
2
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Blower Motor Access
18" (45.7 cm) W x
15" (38.1 cm) H
32" (81.3 cm)
18-1/2"
(47 cm)
Kohler Co.
Publicidad
