Cleaning And Maintenance - EUROM Safe-blade fan Instrucciones

OPERATION
Before using the device, make sure all of the safety guidelines have been taken into account. Always
ensure that the floor is sturdy, flat and horizontal.
 Operation button (at back) to OFF.
 Insert the plug into the socket.
 Turn the operation button to ON – it doesn't matter
to right or left.
 In order to switch off, always turn the button to OFF
then take the plug out of the socket!
The Safe-blade fan is equipped with a 'smart' motor and
soft, rubber blades. If a finger or other object is placed
between the blades while the fan is on, the motor will slow
down or stop completely. Once the object has been
removed, the motor will resume regular speed. The rubber
blades limit the risk of damage or injury.

CLEANING AND MAINTENANCE


Always turn the fan off and take plug out of socket before cleaning or carrying out maintenance work!

Clean the fan with a damp cloth. Do not use any abrasive or corrosive cleaning products that could
damage the material. Never immerse the fan, electrical cable or blades in liquid!

Let the fan dry out thoroughly before using it again.

Store the fan at the end of the season in a safe, dry place that is not subject to extremes of
temperature, preferably in its original packaging.
CE - DECLARATION
It is hereby declared by Euromac bv., Kokosstraat 20, 8281 JC Genemuiden that the devices below:
Make:
Model:
Description:
complies with the LVD guideline 2006/95/EG and the EMC guideline 2004/108/EC and meets the
following standards:
EN 60335-2-80:03+A1:04
EN 60335-1:02+A11:04+A1:04
+A12:06+A2:06+A13:08
EN 62233:2008
Genemuiden, 22-11-2012
W.J. Bakker, Gen. Dir.
EUROM
Safe-blade fan
Fan
+A2:09
+A14:10
5
EN 55014-1:06+A1:09
EN 55014-2:97+A1:01+A2:08
EN 61000-3-2:06+A1:09+A2:09
EN 61000-3-3:08