Cleaning And Maintenance - EUROM HVF14-2 Instrucciones

OPERATION
Before using the device, make sure all of the safety guidelines
have been taken into account.
 Operation button (at back) to 0.
 Insert the plug into the socket.
 Choose the setting desired:
1 = low (pleasant breeze)
2 = average (powerful breeze)
3 = high (very powerful wind)
Back to 0 = switch off
In order to switch off, always turn the button to 0 then take the
plug out of the socket!
CHANGING WIND DIRECTION
Always switch the fan off and remove plug from socket before changing wind direction!
Take the safety grille in both hands and turn it to the desired direction.
The HVF14-2 and HVF18-2 can be tilted by approximately 150°, the HVF18-2S can move by
about 275°.

CLEANING AND MAINTENANCE

Always turn the fan off and take plug out of socket before cleaning or carrying out maintenance
work!
You can remove the front grid by loosening the six little screws and nuts located at the edge.
Clean the grille and fan blades with a (slightly humid) soft cloth. Do not use a corrosive or
abrasive cleaning agent! Dry everything properly.
Keep the engine housing and the opening free from dust and dirt with a vacuum and/or brush.
Do not use any water here!
Further maintenance is not required. Please consult your supplier or an electrician if you have
any problems.
Close the safety grille again (including screw) before using the fan.
Store the fan at the end of the season in a safe, dry place that is not subject to extremes of
temperature, preferably in its original packaging.
7