Sanus CFR1615 Manual De Instrucciones página 18

6 Hang frame assembly on bolts [14]. Slip "U" washers [11] onto the bolts [14].
7
Tighten lag bolts [14] only until the washers [11]
are pulled fi rmly against the brace [03].
CAUTION:
Improper use could reduce the
holding power of the lag bolt. To avoid potential
injuries or property damage DO NOT over-
tighten the lag bolts [14].
[14]
[14]
[14]
[11]
13mm
(1/2 in.
)
18