Sanus CFR1615 Manual De Instrucciones página 21

3
10 mm
(3/8 in.)
Drill pilot holes as
illustrated.
CAUTION:
To avoid
potential injuries or
property damage:
 Pilot holes MUST be
drilled to a depth of 89
mm (3.5 in.) using a 10
mm (3/8 in.) diameter
drill bit.
 Never drill into the
mortar between
blocks.
 Minimum solid
concrete thickness:
8 in.
 Minimum concrete
block size: 8 x 8 x 16 in.
89 mm
(3.5 in.)
4
Insert lag bolt anchors
[13].
CAUTION:
To
avoid potential injuries
or property damage
be sure the anchors
[13] seat fl ush with the
concrete surface.
[13]
21