Control Functions - OHAUS Defender 6000 Guia Del Usuario

Defender 6000 Indicators

1.4. Control Functions

i-DT61PW Control Panel
Button
Primary On/Zero
Function If the
(Short Press) terminal is
Off, press to
power on;
If the
terminal is
On, press to
set the zero
point.
Secondary Off
Function If the
(Long Press) terminal is
On, press to
power off.
Menu Yes
Function Accepts the
(Short Press) current
setting on
the display.
Notes:

Short Press: press less than 1 second.

Long Press: press and hold for more than 2 seconds.
Print Function
Sends the Initiates an
current value application
to the mode.
selected
COM ports if
AUTOPRINT
is disabled.
Units Mode
Changes the Allows
weighing changing the
unit. application
mode.
No Back
Advances to Moves Back
the next to the
menu or previous
menu item. menu item.
Rejects the
current
setting on
the display
and
advances to
the next
available
one.
i-DT61XWE Control Panel
M+ Target
Accumulates Sets
the weight or under/over
displays the limit value for
accumulated Check.
information
with no load
on the pan.
Menu Target
Enters the Shows
User menu. under/over
limit value for
Check.
Exit
Exits the
User menu.
Aborts the
calibration in
progress.
EN-3
Tare
Enters/clears
a tare value;
When the
accumulation
data is
displayed,
press to
clear them.
Tare
Displays the
tare weight.