Rack Dry Cycle (Hde/Hdg5000Aw, Chde5000Aw); Other Features; Lint Filter; Pausing Or Restarting - Haier HDE5000AW Manual Para El Usuario

RACK DRY CYCLE
HDE/HDG 5000AW, CHDE5000AW
1. Press power On button to power on.
2. Turn the cycle dial to Manual Dry cycle and select Rack Dry.
3. Press "Temperature" button to select suitable temperature.
4. Press "More Time" and "Less Time" buttons to set a suitable time.
5. Press "Start/Pause" button to activate.

Other Features

Your dryer also has the following features for your convenience:

Lint Filter:

• All dryers come with a lint filter that needs to be cleaned before or after every
use (read "Care and Cleaning Guide" Section).
Leveling Legs:
• Your dryer has four leveling legs which are located in the front and rear
corners of your dryer. After installing your dryer in its final position, you can
level your dryer.
• Leveling legs can be adjusted by turning them clockwise to raise your dryer or
by turning them counterclockwise to lower your dryer.

Pausing or Restarting:

• To pause the dryer at any time open the door or touch or press the start/pause
button once. To restart, close door and touch or press start/pause button once.
NOTE: Dryer will continue from where the cycle was interrupted, when door
is closed within 5 minutes. If the cycle is interrupted for more than 5 minutes
the dryer will shut off. New cycle settings must be selected before restarting the
dryer.
English
32